ZERO ORDER RELEASE FILMS ::
These films are called laminates and are meant for topical applications Nitroglycerin laminates are prepared by mixing propylene glycol with about 1 % carbopol resin The mixture is neutralised with sodium hydroxide solution and then 0.1% of nitroglycerin is added it is then placed between polythene sheets 5 *5 cm and its edges are sealed by heat it is then placed on a pressure sensitive adhesive sheet of 5.5 *5.5 cm so that it can be properly adhesive to the skin Such laminates release the drug (nitroglycerin ) slowly into circulation for about 12 hours Similarly pilocarpine films are prepared from acrylates and methacrylates .
BUCCAL STRIPS ::
The buccal and sublingual tablets are now replaced with buccal strips These strips consist of a thin absorbent base of fabrics filter paper and cotton etc The buccal strips are prepared by immersing a long piece of fabric made from polyamide fibres into a molten mixture of carbowaxes and dissolved or dispersed drug (around 20%) The fabric is then cooled and cut into small pieces (ideal dimension is 2*1 cm ) The buccal strip is made in contact with buccal mucosa for about 15 minutes and then it is removed and discarded .
SPRAY BANDAGES ::
These bandages are prepared by spraying the solution of drug in polylactide ( polymer of lactic acid anhydride ) A 2 % solution of purified lactide polymer is made in chloroform and the drug in the concentration of 0.01 % to 90% is dissolved or dispersed in it Such solution is then packed in an aerosol container having a suitable propellant such as CF2 CI2 (Dichloro- difluro methane ) When this solution is sprayed it will be a comfortable bandage which can be simply washed off with warm water .
TRANSLATE IN HINDI ::
ज़ीरो ऑर्डर रिलीज़ फ़िल्म्स ::
इन फ़िल्मों को लैमिनेट कहते हैं और ये टॉपिकल एप्लीकेशन के लिए होती हैं। नाइट्रोग्लिसरीन लैमिनेट प्रोपलीन ग्लाइकॉल को लगभग 1% कार्बोपोल रेज़िन के साथ मिलाकर तैयार किए जाते हैं। इस मिक्सचर को सोडियम हाइड्रॉक्साइड सॉल्यूशन से न्यूट्रलाइज़ किया जाता है और फिर 0.1% नाइट्रोग्लिसरीन मिलाया जाता है। फिर इसे 5 * 5 cm की पॉलीथीन शीट के बीच रखा जाता है और इसके किनारों को गर्मी से सील कर दिया जाता है। फिर इसे 5.5 * 5.5 cm की प्रेशर सेंसिटिव एडहेसिव शीट पर रखा जाता है ताकि यह स्किन पर ठीक से चिपक सके। ऐसे लैमिनेट लगभग 12 घंटे तक दवा (नाइट्रोग्लिसरीन) को धीरे-धीरे सर्कुलेशन में छोड़ते हैं। इसी तरह पिलोकार्पाइन फ़िल्में एक्रिलेट्स और मेथैक्रिलेट्स से तैयार की जाती हैं।
बकल स्ट्रिप्स ::
बकल और सबलिंगुअल टैबलेट्स की जगह अब बकल स्ट्रिप्स ले रही हैं। इन स्ट्रिप्स में कपड़े, फिल्टर पेपर और कॉटन वगैरह का पतला सोखने वाला बेस होता है। बकल स्ट्रिप्स को पॉलीमाइड फाइबर से बने कपड़े के एक लंबे टुकड़े को कार्बोवैक्स और घुली हुई या फैली हुई दवा (लगभग 20%) के पिघले हुए मिक्सचर में डुबोकर तैयार किया जाता है। फिर कपड़े को ठंडा करके छोटे टुकड़ों में काट लिया जाता है (आइडियल साइज़ 2*1 cm है)। बकल स्ट्रिप को लगभग 15 मिनट के लिए बकल म्यूकोसा के संपर्क में रखा जाता है और फिर उसे निकालकर फेंक दिया जाता है।
स्प्रे बैंडेज ::
ये बैंडेज पॉलीलैक्टाइड (लैक्टिक एसिड एनहाइड्राइड का पॉलीमर) में दवा के सॉल्यूशन को स्प्रे करके तैयार किए जाते हैं। क्लोरोफॉर्म में प्यूरिफाइड लैक्टाइड पॉलीमर का 2% सॉल्यूशन बनाया जाता है और इसमें 0.01% से 90% कंसंट्रेशन वाली दवा घोली या फैलाई जाती है। फिर इस सॉल्यूशन को एक एरोसोल कंटेनर में पैक किया जाता है जिसमें CF2 CI2 (डाइक्लोरो-डाइफ्लुरो मीथेन) जैसा सही प्रोपेलेंट होता है। जब इस सॉल्यूशन को स्प्रे किया जाता है, तो यह एक आरामदायक बैंडेज बन जाती है जिसे गर्म पानी से आसानी से धोया जा सकता है।
0 Comments