MIXING AND HOMOGENISATION ::
,Mixing is the most widely used operation in which two or more than two substances are combined together perfect mixing is that in which each particle of one material lies as nearly adjacent as possible to a particle of the other material .
The degree of mixing as defined above is not normally practicable. The desired degree of mixing depends on the purpose of the product and the objective of mixing The main objectives of mixing may be
1. Simple physical mixing of materials to form a uniform mixture .
2. To promote the chemical reaction to get uniform products .
3. Dispersion of solid in liquid to form suspension or paste .
4. Dispersion of two immiscible liquids to form an emulsion .
TYPES OF MIXTURES ::
There are three types of mixtures - (1) Positive mixtures (2) Negative mixtures (3) Neutral mixtures .
Positive mixtures ::
When two or more than two miscible liquids are mixed or soluble solid is dissolved in water the mixtures are called positive mixtures These mixtures do not present any problem in mixing moreover the mixture formed is irreversible .
Negative mixtures ::
When two immiscible liquids are mixed or insoluble solids are mixed with water it forms negative mixtures for preparing such types of mixtures a higher degree of mixing of materials is required The mixture formed is a reversible mixture .
Neutral mixtures ::
These mixtures are static in their behaviour The substances do not have the tendency to mix with each other immediately but once mixed they do not separate after mixing .
TRANSLATE IN HINDI ::
मिक्सिंग और होमोजेनाइजेशन ::
मिक्सिंग सबसे ज़्यादा इस्तेमाल होने वाला ऑपरेशन है जिसमें दो या दो से ज़्यादा चीज़ों को एक साथ मिलाया जाता है। परफेक्ट मिक्सिंग वह है जिसमें एक मटीरियल का हर पार्टिकल दूसरे मटीरियल के पार्टिकल के जितना हो सके पास होता है।
ऊपर बताई गई मिक्सिंग की डिग्री आम तौर पर प्रैक्टिकल नहीं होती है। मिक्सिंग की ज़रूरी डिग्री प्रोडक्ट के मकसद और मिक्सिंग के मकसद पर निर्भर करती है। मिक्सिंग के मुख्य मकसद हो सकते हैं
1. एक जैसा मिक्सचर बनाने के लिए मटीरियल की सिंपल फिजिकल मिक्सिंग।
2. एक जैसे प्रोडक्ट पाने के लिए केमिकल रिएक्शन को बढ़ावा देना।
3. सस्पेंशन या पेस्ट बनाने के लिए सॉलिड का लिक्विड में डिस्पर्शन।
4. दो इमिसिबल लिक्विड का इमल्शन बनाने के लिए डिस्पर्शन।
मिक्सचर के प्रकार ::
मिक्सचर तीन तरह के होते हैं - (1) पॉजिटिव मिक्सचर (2) नेगेटिव मिक्सचर (3) न्यूट्रल मिक्सचर।
पॉजिटिव मिक्सचर ::
जब दो या दो से ज़्यादा मिसिबल लिक्विड मिलाए जाते हैं या घुलनशील सॉलिड पानी में घुला होता है, तो मिक्सचर को पॉजिटिव मिक्सचर कहते हैं। इन मिक्सचर को मिलाने में कोई दिक्कत नहीं होती, इसके अलावा जो मिक्सचर बनता है वह इर्रिवर्सिबल होता है।
नेगेटिव मिक्सचर ::
जब दो इम्मिसिबल लिक्विड मिलाए जाते हैं या इनसॉल्युबल सॉलिड पानी में मिलाए जाते हैं, तो यह नेगेटिव मिक्सचर बनाता है। इस तरह के मिक्सचर बनाने के लिए मटीरियल को ज़्यादा मिलाने की ज़रूरत होती है। बनने वाला मिक्सचर एक रिवर्सिबल मिक्सचर होता है।
न्यूट्रल मिक्सचर ::
ये मिक्सचर अपने बिहेवियर में स्टैटिक होते हैं। सब्सटेंस में एक-दूसरे के साथ तुरंत मिलने की टेंडेंसी नहीं होती, लेकिन एक बार मिलने के बाद वे अलग नहीं होते।
0 Comments