COMMON FORMULAE USED IN PERCENTAGE CALCULATIONS ::
1. Preparation of 1% w/v solutions in the imperial system
(a) Solid - 1gr Solvent to produce 110 m
(b) Solid - 4.375 gr Solvent to produce 1 fluid ounce
(c) Solid - 35 gr Solvent to produce & fluid ounce
The formula (a) above should be used when the volume of the solution required is small and the strength of the solution required is weak The formulae (b) and (c) should be used in other cases .
2. Preparation of 1 % w/v solution in metric system
Solid - 1 g
Solvent to produce 100 ml
3. Preparation of percentage solution by diluting the concentrated solution .
Strength of dilute solution = Strength of concentrate
-------------------------------
Degree of dilution
Volume of stronger = Volume required * Percentage required
alcohol to be used --------------------------------------------------
Percentage used
Weight of stronger = Weight required * percentage required
acid to be used -----------------------------------------------
Percentage used
Wherever possible the metric system should be used even if a quantity is demanded in the imperial system The calculations are made using convenient metric quantities in case it is necessary to transpose a formula from the metric to the imperial system the following relationship may be applied .
Solvent to 100 ml 100 fl oz 1 fl oz 100 m
produce
There are two rules which may be applied :
Rule 1 - g may be read as oz avoir
ml may be read as fl oz
Rule 2 - g may be read as grain
ml may be read as minim after adding 10 percent to the figure .
Rule (1) is applied for large batches and Rule (2) is applied for small batches .
TRANSLATE IN HINDI ::
परसेंटेज कैलकुलेशन में इस्तेमाल होने वाले आम फ़ॉर्मूले ::
1. इंपीरियल सिस्टम में 1% w/v सॉल्यूशन तैयार करना
(a) सॉलिड - 110 ml बनाने के लिए 1gr सॉल्वेंट
(b) सॉलिड - 4.375 gr सॉल्वेंट 1 फ्लूइड औंस बनाने के लिए
(c) सॉलिड - 35 gr सॉल्वेंट & फ्लूइड औंस बनाने के लिए
ऊपर दिया गया फ़ॉर्मूला (a) तब इस्तेमाल करना चाहिए जब ज़रूरी सॉल्यूशन का वॉल्यूम कम हो और ज़रूरी सॉल्यूशन की स्ट्रेंथ कम हो। दूसरे मामलों में फ़ॉर्मूले (b) और (c) इस्तेमाल करने चाहिए।
2. मीट्रिक सिस्टम में 1% w/v सॉल्यूशन तैयार करना
सॉलिड - 1 g
100 ml बनाने के लिए सॉल्वेंट
3. कंसन्ट्रेटेड सॉल्यूशन को डाइल्यूट करके परसेंटेज सॉल्यूशन तैयार करना।
डाइल्यूट सॉल्यूशन की स्ट्रेंथ = कंसन्ट्रेट की स्ट्रेंथ
------------------------------
डाइल्यूटेशन की डिग्री
स्ट्रॉन्गर का वॉल्यूम = ज़रूरी वॉल्यूम * ज़रूरी परसेंटेज
इस्तेमाल की जाने वाली अल्कोहल --------------------------------------------------
इस्तेमाल किया गया परसेंटेज
स्ट्रॉन्गर का वज़न = ज़रूरी वज़न * ज़रूरी परसेंटेज
इस्तेमाल किया जाने वाला एसिड -----------------------------------------------
इस्तेमाल किया गया परसेंटेज
जहां भी हो सके, मेट्रिक सिस्टम का इस्तेमाल करना चाहिए, भले ही इंपीरियल सिस्टम में क्वांटिटी की डिमांड हो। कैलकुलेशन आसान मेट्रिक क्वांटिटी का इस्तेमाल करके की जाती है, अगर किसी फ़ॉर्मूले को मेट्रिक से इंपीरियल सिस्टम में ट्रांसपोज़ करना ज़रूरी हो, तो नीचे दिया गया रिलेशनशिप अप्लाई किया जा सकता है।
सॉलिड 1 g 1 oz (avoir) 4.375 g 1 gr
सॉल्वेंट से 100 ml 100 fl oz 1 fl oz 100 m
प्रोड्यूस
दो नियम हैं जो लागू हो सकते हैं:
नियम 1 - g को oz avoir पढ़ा जा सकता है
ml को fl oz पढ़ा जा सकता है
नियम 2 - g को ग्रेन पढ़ा जा सकता है
ml को फिगर में 10 परसेंट जोड़ने के बाद मिनिम पढ़ा जा सकता है
नियम (1) बड़े बैच के लिए लागू होता है और नियम (2) छोटे बैच के लिए लागू होता है।
0 Comments